A106 pipe is American standard material, including A, B, C three grades, the ingredients of A106 A is carbon and silicon, the tensile strength grade is 330 MPa. The ingredients of A106 B is carbon，manganese and silicon, the tensile strength grade is 415 MPa. The ingredients of A106 C is carbon, manganese and silicon components, the tensile strength grade is 485 MPa.
Chemical composition(%) of ASTM A106 | ||||||
| Element | C | Si | Mn | S | P | Cr |
| Content | ≤0.25 | ≤0.1 | 0.27-0.39 | ≤0.035 | ≤0.035 | ≤0.4 |
Mechanical properties of ASTM A106 | |||
| Performance | Tensile strength/MPa | Elongation /% | Yield strength/Mpa |
| Proportion（23°C） | 415 | 16.5-30 | 240 |
It is usually used in industrial plants, power plants, refineries and chemical plants. In addition, for the reason of strength values conservation it is came into use in architectural projects. A106 grade pipe is a seamless pipe and there are three types: gr A, gr B and gr C. Among these, the most commonly used type is gr B.
Tests:
1.Measurement of wall thickness changes
2.Tensile Test
3.Hardness Test
4.ASTM Grain Size Analysis
Pressure Tested
ASTM A106 is pressure tested to allow for liquids and gases to be passed through it.
Corrosion resistance
Carbon steel can be resistant to corrosion due to the addition of lacquer coating, hot-dipped galvanizing, or zinc coating. This allows builders to use smaller, thinner pipes, even in environments that are acidic or extremely corrosive.
Shock Resistance
A106 steel offers great resistance to vibration and shock.
High Tensile Strength
ASTM A106 tested has higher tensile strengths than welded one which make it safe to use in situations with very high pressures.
Cost-Effective
No matter the pressure that needs to be withstood, carbon A106 steel can be much thinner than other types . This means that they have a greater carrying capacity than other pipes.
*PVC or interleaving paper to protect surface;
*then use waterproof paper;
*steel strip to reinforcement;
*The four corners are made of triangular iron sheet to protect the edges and corner
*Top 20 companies in steel industry trade volume.
*Customized processing steel one-stop purchase.
*Exports of steel exceeded tens of billions for 5 consecutive years.
*We have a complete set of testing equipment, such as ut & ET, hydrauilc testinge quipment, spectrometer, scanning electron microscope, etc, and have passed SGS TUV certification.
*JM Steel has hundreds of millions of high-end processing equipment at home and abroad, including precision cutting equipment: advanced Italian Nova stainless steel Kaiping production line, Taiwan Weitai stainless steel cross-cutting line, Taiwan Weitai stainless steel slitting line, large-scale stainless steel cold and hot rolling Flattening machine, slitting machine, etc.
For More details of each item,contact our sales to know more about it.Thanks for your visiting of JMJDWX Steel,save our web.You will be more professional in steel industry.
JMJDWX Steel 904L Stainless Steel Profile/Channel.904L (N08904,14539) super austenitic stainless steel profiles contains 14.0-18.0% chromium, 24.0-26.0% nickel and 4.5% molybdenum.904L super austenitic stainless steel belongs to low carbon high nickel and molybdenum austenitic stainless steel, which is stainless and acid resistant.It has good activity-passivation conversion ability and excellent corrosion resistance. under normal pressure to withstand any concentration, any temperature of acetic acid, and acid and acetic acid mixed acid corrosion resistance is also very good.
Specifications:
·Outer Diameter: Φ6-Φ3000mm (Minimum – Maximum)
·Wall Thickness: 0.3-45mm (Minimum – Maximum)
·Customized size needs to be confirmed with us
Standards：
·American Standard: ASTM A312, ASTM A358, ASTM A249, ASTM A269, ASTM A554, ASTM A790
·European Standard: DIN 17457
·Japanese Standard: JIS G3459
·GB Standard: GB/T12770-2002, GB/T12771-2008
Features：
·Anti-corrosion (the degree is susceptible to the alloys contained), heat-resistance, good cold and hot working properties, good toughness, good comprehensive performances and wide application.
Applications：
·Industrial application such as petroleum, chemical, paper plant, sewage system, energy, dyeing workshop, mechanical and structural application, boiler heat exchange and others.
Mill tolerances on thickness & flatness applies.Call JMJDWX Steel if you need specific sizes or grain direction.
Chemical composition and mechanical properties Of stainless steel 904L
Chmenical properties Of stainless steel 904L:
| Grade | Ni | Mo | Cr | Cu | C | Mn | Si | C | P | S |
| 904L | 23~28 | 4~5 | 19~23 | 1~2 | 0.02max | 20max | 1.0max | 0.02max | 0.045max | 0.035max |
Mechanical properties Of stainless steel 904L:
| Grade | Density | Melting point | Yied strength/Mpa | Tensile strength/Mpa | Elongation % |
| 904L | Density | 1300-1390℃ | 216 | ≥490 | ≥36 |
WHY CHOOSE US ?
·Top 20 companies in stainless steel industry trade volume
·Customized processing stainless steel one-stop purchase
·Exports of stainless steel exceeded tens of billions for 5 consecutive years
·We have a complete set of testing equipment, such as ut & ET, hydrauilc testinge quipment, spectrometer, scanning electron microscope, etc, and have passed SGS TUV certification
·JM Steel has hundreds of millions of high-end processing equipment at home and abroad, including precision cutting equipment: advanced Italian Nova stainless steel Kaiping production line, Taiwan Weitai stainless steel cross-cutting line, Taiwan Weitai stainless steel slitting line, large-scale stainless steel cold and hot rolling Flattening machine, slitting machine, etc
For More details of each item,contact our sales to know more about it.Thanks for your visiting of JMJDWX Steel,save our web.You will be more professional in steel industry.
Trust us for reliable steel solutions that meet your project needs.
Don’t miss our future updates! Get Subscribed Today!
Trust us for reliable steel solutions that meet your project needs.
Don’t miss our future updates! Get Subscribed Today!
©2025. All Rights Reserved.